DIR-300A Wireless N150 Router
User Manual
Overview
Back and Bottom Panels
Figure 2. Back panel view.
Name Description
12VDC IN Power connector.
POWER A button to turn the router on/off.
INTERNET
A port to connect to a cable or DSL modem or to a private Ethernet line
(it is recommended to use the cable included in the delivery package).
LAN 1-4
4 Ethernet ports to connect computers or network devices.
WPS
A button to set up a secure wireless connection (the WPS function) and
enable/disable the wireless network.
To use the WPS function: with the device turned on, push the button,
hold it for 2 seconds, and release. The WLAN / WPS LED should start
blinking.
To disable the router's wireless network: with the device turned on, press
the button, hold for 7 seconds, and release. The WLAN / WPS LED
should turn off.
Page 13 of 181
To Next Page
Loading...
