DIR-300A Wireless N150 Router
User Manual
Configuring via Web-based Interface
Creating Static IP or Dynamic IP WAN Connection
To create a connection of the Static IP or Dynamic IP type, click the Add button on the Net / WAN
page. On the opened page, select the relevant value from the Connection Type drop-down list
and specify the needed values.
Figure 73. The page for creating a new Static IP connection. The General settings section.
Parameter Description
General settings
Interface
A physical or virtual interface to which the new connection will be
assigned.
Name
A name for connection for easier identification.
Enable
Select the checkbox to enable the connection.
Direction
The direction of this connection.
Page 88 of 181
To Next Page
Loading...
