DIR-300A Wireless N150 Router
User Manual
Configuring via Web-based Interface
Flow Control
On the Advanced / Flow Control page, you can enable and disable data flow control for the
WAN port of the router.
This function is used for equal load balancing in ISPs' networks. Contact your ISP to clarify if this
function needs to be enabled.
Figure 119. The Advanced / Flow Control page.
To enable the flow control function, select the Enabled checkbox and click the Apply button.
To disable the flow control function, deselect the Enabled checkbox and click the Apply button.
Page 149 of 181
To Next Page
Loading...
