DIR-300A Wireless N150 Router
User Manual
Configuring via Web-based Interface
Creating PPPoE + Static IP or PPPoE + Dynamic IP WAN Connection
To create a connection of the PPPoE + Static IP or PPPoE + Dynamic IP type, click the Add button
on the Net / WAN page. On the opened page, select the relevant value from the Connection
Type drop-down list and specify the needed values.
Figure 81. The page for creating a new PPPoE + Static IP connection. The General settings section.
Parameter Description
General settings
Interface
A physical or virtual interface to which the new connection will be
assigned.
Name
A name for connection for easier identification.
Enable
Select the checkbox to enable the connection.
Direction
The direction of this connection.
Page 96 of 181
To Next Page
Loading...
