DIR-300A Wireless N150 Router
User Manual
Configuring via Web-based Interface
TR-069 Client
On the Advanced / TR-069 Client page, you can configure the router for communication with a
remote Auto Configuration Server (ACS).
The TR-069 client is used for remote monitoring and management of the device.
Figure 118. The page for configuring the TR-069 client.
You can specify the following parameters:
Parameter Description
Interface
The interface which the router uses for communication with the
ACS. Leave the automatic value to let the device select the
interface basing on the routing table or select another value if
required by your ISP.
Enable TR-069 Client Select the checkbox to enable the TR-069 client.
Page 147 of 181
To Next Page
Loading...
