DIR-300A Wireless N150 Router
User Manual
Configuring via Web-based Interface
Figure 102. The page for adding a MAC address.
Click the Add button and enter an address in the field displayed. Also you can enter the MAC
address of a device connected to the router's LAN at the moment. To do this, select the relevant
device from the Known IP/MAC addresses drop-down list (the field will be filled in
automatically). Then click the Apply button.
To remove a MAC address from the list of MAC addresses, select the checkbox located to the left
of the relevant MAC address and click the Delete button. Then click the Apply button.
Page 120 of 181
To Next Page
Loading...
