DIR-300A Wireless N150 Router
User Manual
Configuring via Web-based Interface
On the next page, you can specify an individual name (SSID) and security settings for the router or
disable the router's wireless network broadcast.
Figure 52. The page for changing the settings of the wireless local area network.
If you want to use the router's wireless network to connect devices, leave the Enable checkbox
selected. Then, if needed, specify another name for the network in the SSID field (use digits and
Latin characters).
It is strongly recommended to configure the secure wireless network of DIR-300A. To do this,
select the Protected value from the Network Authentication drop-down list and enter a key (a
password that will be used to access your wireless network) in the Network key field. Use digits
and Latin characters. After applying this setting, the WPA-PSK/WPA2-PSK mixed
authentication type is specified for the router's WLAN. Click the Next button.
On the next page, the parameters of the network to which you want to connect, the entered
password, and the settings of the wireless network of the router are displayed. Make sure that the
specified settings are correct and then click the Apply button. After that, the wireless channel of
DIR-300A will switch to the channel of the wireless access point to which you have connected.
After configuring the device as a client, you need to create a WAN connection with relevant
parameters for the WiFiClient interface.
After clicking the Apply button, the Home / Information page opens.
Page 67 of 181
To Next Page
Loading...
