DIR-300A Wireless N150 Router
User Manual
Configuring via Web-based Interface
Figure 83. The page for creating a new PPPoE + Static IP connection. The IP section.
Parameter Description
IP
For PPPoE + Static IP type
IP Address Enter an IP address for this WAN connection.
Netmask Enter a subnet mask for this WAN connection.
Gateway IP address Enter an IP address of the gateway used by this WAN connection.
Primary DNS server/
Secondary DNS server
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
For PPPoE + Dynamic IP type
Obtain DNS server
addresses
automatically
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the Primary DNS
server and Secondary DNS server fields are not displayed.
Primary DNS server/
Secondary DNS server
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Vendor ID The identifier of your ISP. Optional.
Hostname A name of the router specified by your ISP. Optional.
Page 98 of 181
To Next Page
Loading...
