Section 4 – Security
————————————————————————————————————————————————————————————
D-Link DIR-524 User Manual 10
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug
anything into the Internet port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your
wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the
Configuration and Wireless Security sections for more information on setting up your wireless network.
To Next Page
Loading...
