D-Link DIR-524 - System

Section 4 – Security
————————————————————————————————————————————————————————————
D-Link DIR-524 User Manual 37
System
The System Tools section allows you to reboot the device, or restore the router to the factory default settings.
Restoring the unit to the factory default settings will erase all settings, including any rules that you have created.
Save to Local
Hard Drive:
Use this option to save the current router
configuration settings to a file on the hard disk of
the computer you are using. First, click the Save
configuration button. You will then see a file
dialog, where you can select a location and file
name for the settings.
Load from
Local Hard
Drive:
Use this option to load previously saved router
configuration settings. First, use the Browse to find
a previously save file of configuration settings.
Then, click the Restore Configuretion from File
button to transfer those settings to the router.
Restore to
Factory
Default s:
This option will restore all configuration settings
back to the settings that were in effect at the time
the router was shipped from the factory. Any
settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current router configuration
settings, use the Save configuration button
above.
Reboot the
Device:
Click to reboot the router.