D-Link DIR-524 - Static Routing

Section 4 – Security
————————————————————————————————————————————————————————————
D-Link DIR-524 User Manual 34
Static Routing
The static routing function determines the path that data follows over your network before and after it passes through
your router. You can use static routing to allow different IP domain users to access the Internet through this device.
Destination IP :
Enter the routing destination IP address.
Subnet Mask:
Enter the routing subnet mask.
Gateway:
Enter the routing gateway.
Metric:
It means the number of the network
equipment that the data will pass.
Interface:
Select the interface to transmit the data out
the router.