D-Link DIR-605 - Time and Date

28
D-Link DIR-605 User Manual
Section 3 - Conguration
Save your settings after configuring your
Internet Connection method.
Enable to turn your router into an access point.
Choose your Internet Connection type.
Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS server
addresses. In most cases, select Dynamic.
Enter the IP address (Static PPPoE only).
Enter the Primary and Secondary DNS server
Addresses (Static PPPoE only).
Enter the Gateway IP Address provided by your
ISP.
Enter your PPPoE password and then retype the
password in the next box.
Select either Always-on, On-Demand, or
Manual.
Enter your PPPoE password and then retype the
password in the next box.
Internet Connection:
Access Point Mode:
Internet Connection
Type:
Address Mode:
PPPoE IP Address:
PPPoE Subnet
Mask:
PPPoE Gateway:
PPPoE Server IP:
Username:
Password:
Russia PPPoE
$IPPTF3VTTJB111P&%VBM"DDFTTJGZPVS*41VTFTB111P&DPOOFDUJPO:PVS*41XJMMQSPWJEFZPVXJUIBVTFSOBNFBOEQBTTXPSE
This option is typically used for DSL services.