DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
IPv6
Go to the IPv6 tab to change IPv6 address of the router and configure IPv6 addresses assignment
settings.
Figure 89. Configuring the local interface. The IPv6 tab. The Local IPv6 Address section.
Parameter Description
Local IPv6 Address
Mode of local IPv6
address assignment
Select the needed value from the drop-down list.
Static: an IPv6 address and a prefix are specified manually.
Prefix delegation: the router requests a prefix to configure an
IPv6 address from a delegating router.
IPv6 address
The IPv6 address of the router in the local subnet. By default, the
following value is specified: fd01::1. The field is available for
editing if the Static value is selected from the Mode of local IPv6
address assignment drop-down list.
Prefix
The length of the prefix subnet. By default, the value 64 is
specified. The field is available for editing if the Static value is
selected from the Mode of local IPv6 address assignment
drop-down list.
Page 106 of 228
To Next Page
Loading...
