DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
% *
On the Advanced / NSG page, you can enable the NSG service. This service allows authorized
access to the Internet for users of your corporate or public wireless network.
Figure 134. The Advanced / NSG page.
To enable the NSG service, move the Enable switch to the right and click the APPLY button. Then
go to the Wi-Fi / Basic Settings page and create an additional wireless network. To do this, click
the ADD WI-FI NETWORK button. On the opened page, specify the relevant parameters and
move the Enable NSG service switch to the right. Click the APPLY button.
Page 164 of 228
To Next Page
Loading...
