D-Link DIR-853 - Udpxy

DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
248
On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY
application. The UDPXY application transforms UDP traffic into HTTP traffic. This application
allows devices which cannot receive UDP streams to access stream video.
Figure 147. The Advanced / UDPXY page.
To enable the application, move the Enable switch to the right.
Upon that the following fields are displayed on the page:
Parameter Description
Port
The port of the router which the UDPXY application uses.
Maximum client number
Maximum number of devices from the router's LAN which will be
served by the application.
Buffer size for incoming
data
Size of intermediate buffer for received data.
By default, the minimum acceptable value is specified.
Buffer size for data
transferred to client
Size of intermediate buffer for transmitted data.
By default, the minimum acceptable value is specified.
After specifying the needed parameters, click the APPLY button.
To access the status page of the application, click the Status link.
Page 178 of 228