DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
When the WPS function is enabled, the Information section is available on the page.
Parameter Description
WPS state
The state of the WPS function:
• Configured (all needed settings are specified; these settings
will be used upon establishing the wireless connection)
• Unconfigured (after activating the WPS function, the SSID
and the encryption key will be configured automatically, the
network authentication type will be changed to WPA2-PSK).
Default PIN code
The PIN code of the router. This parameter is used when connecting
the router to a registrar to set the parameters of the WPS function.
Network name (SSID) The name of the router's wireless network.
Network authentication
The network authentication type specified for the wireless network.
Encryption The encryption type specified for the wireless network.
Password PSK
The encryption password specified for the wireless network.
UPDATE Click the button to update the data on the page.
RESET TO
UNCONFIGURED
Click the button to reset the parameters of the WPS function.
Page 121 of 228
To Next Page
Loading...
