DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
The following fields are available on the page:
Parameter Description
Bandwidth
The channel bandwidth for 802.11n standard in the 2.4GHz band
(the 2.4 GHz tab).
20 MHz: 802.11n clients operate at 20MHz channels.
20/40 MHz: 802.11n clients operate at 20MHz or 40MHz channels.
The channel bandwidth for 802.11n and 802.11ac standards in 5GHz
band (the 5 GHz tab).
20 MHz: 802.11n and 802.11ac clients operate at 20MHz channels.
20/40 MHz: 802.11n and 802.11ac clients operate at 20MHz or
40MHz channels.
20/40/80 MHz: 802.11ac clients operate at 20MHz, 40MHz, or
80MHz channels.
Autonegotiation
20/40 (Coexistence)
Available on the 2.4 GHz tab.
Move the switch to the right to let the router to automatically choose
the most suitable channel bandwidth (20MHz or 40MHz) for the
connected devices (this setting can substantially lower the data
transfer rate of your wireless network). The switch is displayed when
the 20/40 MHz value is selected from the Bandwidth drop-down
list.
TX power
The transmit power (in percentage terms) of the router.
Drop multicast
Move the switch to the right to disable multicasting for the router's
WLAN. Move the switch to the left to enable multicasting from the
WAN connection selected on the Advanced / IGMP page.
Enable TX
Beamforming
TX Beamforming is the signal processing/directing technique which
helps to support a high enough transfer rate in the areas with difficult
conditions for the signal propagation.
Move the switch to the right to improve the signal quality.
Page 131 of 228
To Next Page
Loading...
