DIR-853 AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
The following buttons are also available on the page:
Control Description
Factory
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Back Panel section, page 16).
Backup
Click the button to save the configuration (all settings of the router)
to your PC. The configuration backup will be stored in the
download location of your web browser.
Restore
Click the button and follow the dialog box appeared to select a
previously saved configuration file (all settings of the router)
located on your PC and upload it.
Save
Click the button to save settings to the non-volatile memory.
The router saves changed settings automatically. If changed settings
have not been saved automatically, a notification is displayed in the
top right part of the page.
Reboot
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
In the Idle time field specify a period of inactivity (in minutes) after which the router completes
the session of the interface. By default, the value 5 is specified. Then click the SAVE button.
Page 202 of 228
To Next Page
Loading...
