EasyManuals Logo

D-Link DIR-865L User Manual

D-Link DIR-865L
167 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
86D-Link DIR-865L User Manual
Section 3 - Conguration
Enter a name for your route.
Enter the IP address of packets that will take this
route.
Enter the netmask of the route, please note
that the octets must match your destination IP
address.
Enter your next hop gateway to be taken if this
route is used.
The route metric is a value from 1 to 16 that
indicates the cost of using this route. A value 1 is
the lowest cost and 15 is the highest cost.
Select the interface that the IP packet must use to
transit out of the router when this route is used.
Name:
Destination IP:
Netmask:
Gateway:
Metric:
Interface:
Routing
The Routing option is an advanced method of customizing specic routes of data through your network.

Table of Contents

Other manuals for D-Link DIR-865L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DIR-865L and is the answer not in the manual?

D-Link DIR-865L Specifications

Device Interfaces IconDevice Interfaces
wireless LAN802.11 a/b/g/n/ac
Gigabit LAN portsFour 10/100/1000
Gigabit WAN port10/100/1000
USB portUSB 3.0
Power IconPower
input voltage100 to 240 V AC
input frequency50/60 Hz
output voltage12 V DC
output current2.5 A
USB port power5 V / 0.9 A
Operating Environment IconOperating Environment
operating temperature32°F to 104°F (0°C to 40°C)
humidity95% maximum (non-condensing)
Weight and Dimensions IconWeight and Dimensions
length102.3 mm (4.03 inches)
width123.3 mm (4.85 inches)
height217 mm (8.54 inches)

Related product manuals