D-Link Dis-200G Series

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
99
SSL Global Settings
This window is used to view and configure the SSL feature’s global settings.
To view the following window, click Security > SSL > Global Settings, as shown below:
The fields that can be configured for SSL Global Settings are described below:
Parameter Description
SSL State
Select to enable or disable the SSL feature’s global status here.
Click the Apply button to accept the changes made.
The fields that can be configured for Import File are described below:
Parameter Description
Key Select the Key file that will be upgraded to switch. To browse to the
appropriate file, located on the local computer, by pressing the
Choose File button.
Certificate Select the Certificate file that will be upgraded to switch. To
browse to the appropriate file, located on the local computer, by
pressing the Choose File button.
Click the Apply button to accept the changes made.
Figure 8-13 SSL Global Settings window