DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
72
STP Instance
This window is used to view and configure the STP instance settings.
To view the following window, click L2 Features > Spanning Tree > STP Instance, as shown below:
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
MSTP Port Information
This window is used to view and configure the MSTP port information settings.
To view the following window, click L2 Features > Spanning Tree > MSTP Port Information, as shown
below:
The fields that can be configured are described below:
Parameter Description
Port
Select the port number that will be cleared here.
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 6-38 STP Instance window
Figure 6-39 MSTP Port Information window
To Next Page
Loading...
