DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
128
The fields that can be configured in the Uplink Port Settings section are described below:
Parameter Description
From Port / To Port
Select the uplink port range that will be used
here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Surveillance Log
This window is used to display the surveillance log.
To view the following window, click Surveillance Log, as shown below:
Click the Refresh button to refresh the information displayed in the table.
Click the Backup button to upload the surveillance log to the PC using HTTP.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 12-17 Surveillance Log window
To Next Page
Loading...
