D-Link Dis-200G Series - 29. RADIUS Server Commands

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
141
Port Security
Log Description Severity
Event description: Address full on a port.
Log Message: MAC address <macaddr> causes port security violation on <interface-
id>
Parameters description:
macaddr: The violation MAC address.
interface-id: The interface name.
Warning
Event description: Address full on system.
Log Message: Limit on system entry number has been exceeded
Warning
Safeguard
Log Description Severity
Event description: the host enters the mode of exhausted.
Log Message: Unit <unit-id>, Safeguard Engine enters EXHAUSTED mode.
Parameters description:
unit-id: The Unit ID
Warning
Event description: the host enters the mode of normal.
Log Message: Unit <unit-id>, Safeguard Engine enters NORMAL mode.
Parameters description:
unit-id: The Unit ID
Informational
SNMP
Log Description Severity
Event Description: SNMP request received with invalid community string
Log Message: SNMP request received from <ipaddr> with invalid community string.
Parameters Description:
ipaddr: The IP address.
Informational
Telnet
Log Description Severity