D-Link DNS-321 User Manual

37D-Link DNS-321 User Manual
Section 3 - Configuration
DHCP Server
DHCP Server
Starting IP
Address
Lease Time
DHCP Client
List
The DNS-321 can be used as a DHCP Server. As a DHCP server, it can be used to serve IP addresses to devices on
your local network. However, this feature should not be enabled if you already have a DHCP server, such as a router
on your local network.
Enable or Disable the DNS-321
DHCP Server.
Enter the starting IP address for the
range of addresses assigned by the
DHCP server.
Ending IP
Address
Enter the ending IP address for the
range of addresses assigned by the
DHCP server.
Set the duration of time that an IP
address will remain assigned to a
device.
Displays the Hostname, IP address,
MAC address, and Expired Time of
the clients that have received a
DHCP address.

D-Link DNS-321 Specifications

General

Brand	D-Link
Model	DNS-321
Category	Storage
Language	English