Enable Call Transfer by selecting it.
Enable Semi-Attended Transfer by selecting it
The phone will hang up and return to the idle automatically at
hands-free mode
Specify Auto Hand down Time, the phone will hang up and
return to the idle automatically after Auto Hand down Time at
hands-free mode, and play dial tone Auto Hand down Time at
handset mode
Enable Auto Redial by selecting it, then the phone reminds
whether redial, when the callee is busy or rejects
Specify the Auto Redial interval,
Specify the Auto Redial interval
Enable the function and put on the headset, when there has a
incoming call ,you can press the answer key or line key to
answer the call through the headset ,and it‟s the same if enable
auto answer function
Enable Intercom Mode by selecting it
Enable mute mode during the intercom call
If the incoming call is intercom call, the phone plays the
intercom tone
Enable Intercom Barge by selecting it, the phone auto answers
the intercom call during a call. If the current call is intercom
call, the phone will reject the second intercom call
Set Prefix in peer to peer IP call. For example: what you want
to dial is 192.168.1.119, If you define P2P IP Prefix as
192.168.1., you dial only #119 to reach 192.168.1.119. Default
is “.”. If there is no “.” Set, it means to disable dialing IP.
Enable Turn Off Power Light by selecting it
Specify the Emergency Call Number. Despite the keyboard is
locked ,you can dial the emergency call number
Enable Password Dial by selecting it, When number entered is
beginning with the password prefix, the following N numbers
after the password prefix will be hidden as *, N stand for the
value which you enter in the Password Length field. For
example: you set the password prefix is 3, enter
To Next Page
Loading...
