the Password Length is 2, then you enter the number 34567, it
will display 3**67 on the phone
Specify the prefix of the password call number
Specify the Password length
Enable Call Waiting by selecting it. then the phone reminds
whether redial, when the caller is busy or rejects . if it‟s ok and
the phone finds out that the caller is idle by sip message, it will
reminds whether redial
Enable 3-way conference by selecting it
If select it, the phone will accept the call even if the called
number is IP .
Enable Call Completion by selecting it, If the callee is busy, the
sip server will inspect the callee status at intervals. If the callee
is idle, the server will send notify message to inform the caller
whether redial.
Disable this feature, in standby interface next number, will
realize the number rules ”send out over the time”;Enable the
feature ,then the number will not be send out over the time.
Enable Silent Mode by selecting it, the phone light will red
blink to remind that there is a missed call instead of playing
ring tone
Specify the hide DTMF mode
Enable Ring From Handset by selecting it, the phone plays
ring tone from handset
Specify Reject Return Code
Specify the server IP that remote control phone for
corresponding operation
Specify the Push XML Server, when phone receives request, it
will determine whether to display corresponding content on the
phone which sent by the specified server or not.
Turn off this feature, you will not hear issued a " beep" sound
with more calls
You can see the phone call history
Enable multi-line,10 road calls can be enabled, otherwise make
To Next Page
Loading...
