D-Link DSL-2600U Quick Installation Guide

PC with Wi-Fi Adapter
ﺭﻮﺘﭘﺍﺩﺁ ﺎﺑ ﺮﺗﻮﻴﭙﻣﺎﻛWi-Fi
1. To connect the router to a DSL line: connect a phone cable
between the DSL port of the router and the MODEM port of the
splitter. Connect your phone to the PHONE port of the
splitter. Then connect another phone cable between a phone
jack and the LINE port of the splitter.
1 ﻂﺧ ﻪﺑ ﺮﺗﻭﺭ ﻝﺎﺼﺗﺍ - DSL ﺕﺭﻮﭘ : DSL ﻡﺩﻮﻣ ﺕﺭﻮﭘ ﻪﺑ ﻦﻔﻠﺗ ﻞﺑﺎﻛ ﻚﻳ ﺎﺑ ﺍﺭ ﺮﺗﻭﺭ
Splitter ﺕﺭﻮﭘ ﻪﺑ ﺍﺭ ﺩﻮﺧ ﻝﺰﻨﻣ ﻦﻔﻠﺗ ﻩﺎﮕﺘﺳﺩ ﻭ ﻩﺩﺮﻛ ﻞﺼﺘﻣ Phone ﻪﺑ ﻁﻮﺑﺮﻣ
Splitter ﺕﺭﻮﭘ ﻪﺑ ﻦﻔﻠﺗ ﻞﺑﺎﻛ ﻚﻳ ﺎﺑ ﺍﺭ ﻦﻔﻠﺗ ﺰﻳﺮﭘ ﺲﭙﺳ . ﺪﻴﺋﺎﻤﻧ ﻞﺼﺘﻣ Line
ﻪﺑ ﻁﻮﺑﺮﻣ Splitter . ﺪﻴﺋﺎﻤﻧ ﻞﺼﺘﻣ
2. To connect the router to an Ethernet line: connect the
Ethernet cable between the Ethernet port located on the back
panel of the router and the Ethernet line.
2 – ﺯﺍ ﻩﺩﺎﻔﺘﺳﺍ ﺎﺑ ﺍﺭ ﺮﺗﻭﺭ ﻲﺘﺸﭘ ﻞﻨﭘ ﻱﻭﺭ ﺮﺑ ﺩﻮﺟﻮﻣ ﺖﻧﺮﺗﺍ ﺕﺭﻮﭘ : ﺖﻧﺮﺗﺍ ﺕﺭﻮﭘ ﻪﺑ ﺮﺗﻭﺭ ﻝﺎﺼﺗﺍ
. ﺪﻴﺋﺎﻤﻧ ﻞﺼﺘﻣ ﺩﻮﺧ ﺮﺗﻮﻴﭙﻣﺎﻛ ﺖﻧﺮﺗﺍ ﺕﺭﻮﭘ ﻪﺑ ﺖﻧﺮﺗﺍ ﻞﺑﺎﻛ ﻚﻳ
3. Connect the power cord to the power connector port on the
back panel of the router, then plug the power adapter into an
electrical outlet or power strip.
3 - ﺍﺭ ﻕﺮﺑ ﺭﻮﺘﭘﺍﺩﺁ ﺲﭙﺳ ، ﺪﻴﺋﺎﻤﻧ ﻞﺼﺘﻣ ﺮﺗﻭﺭ ﺖﺸﭘ ﻞﻨﭘ ﺭﺩ ﺩﻮﺟﻮﻣ ﻕﺮﺑ ﺭﻮﺘﻜﻧﺎﻛ ﻪﺑ ﺍﺭ ﻕﺮﺑ ﻞﺑﺎﻛ
. ﺪﻴﻨﻛ ﻞﺼﺘﻣ ﻕﺮﺑ ﺰﻳﺮﭘ ﻪﺑ
8

D-Link DSL-2600U Specifications

Power

input voltage	100V-240V
input current	0.6A
input frequency	50 Hz - 60 Hz
output voltage	12V
output current	1A

Data Transfer Rates

G.dmt full rate downstream	up to 8 Mbps
G.dmt full rate upstream	up to 1 Mbps
G.lite ADSL downstream	up to 1.5 Mbps
G.lite ADSL upstream	up to 512 Kbps
G.dmt.bis full rate downstream	up to 12 Mbps
G.dmt.bis full rate upstream	up to 1 Mbps
ADSL2+ full rate downstream	up to 24 Mbps
ADSL2+ full rate upstream	up to 1 Mbps
IEEE 802.11b wireless transfer rates	11, 5.5, 2, and 1Mbps
IEEE 802.11g wireless transfer rates	6, 9, 12, 18, 24, 36, 48, 54 Mbps

Interfaces

ADSL interface connector	RJ-11
LAN interface port	RJ-45
LAN interface standard	10/100BASE-T Ethernet