CONNECTING
TO PC (OS WINDOWS
XP)
ﻞﻣﺎﻋ ﻢﺘﺴﻴﺳ ﺎﺑ ﺮﺗﻮﻴﭙﻣﺎﻛ ﻪﺑ ﻝﺎﺼﺗﺍ
WINDOWS
XP
PC with Ethernet Adapter
ﺖﻧﺮﺗﺍ ﻪﻜﺒﺷ ﺕﺭﺎﻛ ﺎﺑ ﺮﺗﻮﻴﭙﻣﺎﻛ
1. Make sure that your PC is powered off.
1 –. ﺖﺳﺍ ﺵﻮﻣﺎﺧ ﺎﻤﺷ ﺮﺗﻮﻴﭙﻣﺎﻛ ﺪﻳﻮﺷ ﻦﺌﻤﻄﻣ
2. Connect an Ethernet cable between the Ethernet port located
on the back panel of the router and the Ethernet port of your
PC.
2 –ﺯﺍ ﻩﺩﺎﻔﺘﺳﺍ ﺎﺑ ﺮﺗﻮﻴﭙﻣﺎﻛ ﺖﻧﺮﺗﺍ ﺕﺭﻮﭘ ﻪﺑ ﺍﺭ ﺮﺗﻭﺭ ﺖﺸﭘ ﻞﻨﭘ ﻱﻭﺭ ﺮﺑ ﺩﻮﺟﻮﻣ ﺖﻧﺮﺗﺍ ﺕﺭﻮﭘ ﻚﻳ
. ﺪﻴﻨﻛ ﻞﺼﺘﻣ ﺖﻧﺮﺗﺍ ﻞﺑﺎﻛ
3. Connect a phone cable between the DSL port of the router
and the MODEM port of the splitter. Connect your phone to the
PHONE port of the splitter. Then connect a other phone cable
between a phone jack and the LINE port of the splitter.
3 – ﺕﺭﻮﭘ DSL ﻡﺩﻮﻣ ﺕﺭﻮﭘ ﻪﺑ ﻦﻔﻠﺗ ﻞﺑﺎﻛ ﻚﻳ ﺯﺍ ﻩﺩﺎﻔﺘﺳﺍ ﺎﺑ ﺍﺭ ﺮﺗﻭﺭ Splitter ﺪﻴﺋﺎﻤﻧ ﻞﺼﺘﻣ
ﻦﻔﻠﺗ ﺕﺭﻮﭘ ﻪﺑ ﺍﺭ ﺩﻮﺧ ﻦﻔﻠﺗ Splitterﺲﭙﺳ . ﺪﻴﺋﺎﻤﻧ ﻞﺼﺘﻣ ﺖﻬﺟ ﻱﺮﮕﻳﺩ ﻦﻔﻠﺗ ﻞﺑﺎﻛ ﺯﺍ
ﺕﺭﻮﭘ ﻪﺑ ﻦﻔﻠﺗ ﺰﻳﺮﭘ ﻝﺎﺼﺗﺍ Line ﻪﺑ ﻁﻮﺑﺮﻣ Splitter . ﺪﻴﺋﺎﻤﻧ ﻩﺩﺎﻔﺘﺳﺍ
4. Connect the power cord to the power connector port on the
back panel of the router, then plug the power adapter into an
electrical outlet or power strip.
4 – ﻕﺮﺑ ﺭﻮﺘﭘﺍﺩﺁ ﺲﭙﺳ ، ﺪﻴﺋﺎﻤﻧ ﻞﺼﺘﻣ ﺮﺗﻭﺭ ﺖﺸﭘ ﻞﻨﭘ ﺭﺩ ﺩﻮﺟﻮﻣ ﻕﺮﺑ ﺭﻮﺘﻜﻧﺎﻛ ﻪﺑ ﺍﺭ ﻕﺮﺑ ﻞﺑﺎﻛ
. ﺪﻴﻨﻛ ﻞﺼﺘﻣ ﻕﺮﺑ ﺰﻳﺮﭘ ﻪﺑ ﺍﺭ
5. Turn on your PC and wait until your operating system is
completely loaded.
5 –ﺎﻛ . ﺩﻮﺷ ﺍﺮﺟﺍ ﻞﻣﺎﻛ ﺭﻮﻃ ﻪﺑ ﻞﻣﺎﻋ ﻢﺘﺴﻴﺳ ﺎﺗ ﺪﻴﺋﺎﻤﻧ ﺮﺒﺻ ﻭ ﻩﺩﻮﻤﻧ ﻦﺷﻭﺭ ﺍﺭ ﺩﻮﺧ ﺮﺗﻮﻴﭙﻣ
5
To Next Page
Loading...
Need help?
Power
Data Transfer Rates
