D-Link DSL-2740B - Basic Router Configuration Steps; Configuration Summary; Configuring Computer IP Settings for DHCP

Section 3 - Configuration
D-Link DSL-2740B User Manual
22
STEP 2: TIME
Check the Enable NTP Server.
Select specific time server to use from the NTP Server Used drop-down
menu.
Select your operating time zone from the Time Zone drop-down menu.
Check the Enable Daylight Saving if needed and then select the proper
Daylight Saving Offset drop-down menu. Configure the Daylight
Saving Dates from start date to end.
Click on the Save Settings button to apply your settings.