DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Configuring via Web-based Interface
Figure 80. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Parameter Description
Dynamic IPv6 Addresses
Mode of dynamic IPv6
address assignment
Select the needed value from the drop-down list.
Disable: clients' IPv6 addresses are assigned manually.
Stateful: the built-in DHCPv6 server of the router allocates
addresses from the range specified in the Start IPv6 and End IPv6
fields.
Stateless: clients themselves configure IPv6 addresses using the
prefix.
Start IPv6
The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
End IPv6
The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
Lease Time
The lifetime of IPv6 addresses provided to clients. The field is
available for editing, if the Static value is selected from the Mode
of local IPv6 address assignment list in the Local IPv6
Address section.
When all needed settings are configured, click the APPLY button.
Page 101 of 174
To Next Page
Loading...
Need help?
Data Transfer Rates
