DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Configuring via Web-based Interface
Creating WAN Connection
!
You should configure your WAN connection in accordance with data provided by your
Internet service provider (ISP). Make sure that you have obtained all necessary information
prior to configuring your connection. Otherwise contact your ISP.
1. On the Internet connection type page, from the Connection type list, select the
connection type used by your ISP and fill in the fields displayed on the page.
2. Specify the settings necessary for the connection of the selected type.
3. For the Ethernet connection method: If your ISP uses MAC address binding, select the
Clone MAC address of your device checkbox.
4. For the Ethernet connection method: If the Internet access is provided via a VLAN
channel, select the Use VLAN checkbox and fill in the VLAN ID field.
5. For the ADSL connection method: Specify the VPI and VCI values in the relevant fields.
6. Click the NEXT button to continue or click the BACK button to return to the previous page.
Page 38 of 174
To Next Page
Loading...
Need help?
Data Transfer Rates
