DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Configuring via Web-based Interface
In the Security Settings section, you can change security settings of the wireless network.
By default, the WPA2-PSK network authentication type of the wireless network is specified. WPS
PIN from the barcode label is used as the network key.
Figure 83. Network authentication types supported by the router.
The router supports the following authentication types:
Authentication type Description
Open
Open authentication (with WEP encryption for wireless network
modes not supporting 802.11n devices).
WEP-64
Authentication with a 64-bit shared key with WEP encryption. This
authentication type is not available when a mode supporting 802.11n
devices is selected from the Wireless mode drop-down list on the
Wi-Fi / Basic Settings page.
WEP-128
Authentication with a 128-bit shared key with WEP encryption. This
authentication type is not available when a mode supporting 802.11n
devices is selected from the Wireless mode drop-down list on the
Wi-Fi / Basic Settings page.
WPA
WPA-based authentication using a RADIUS server.
WPA-PSK WPA-based authentication using a PSK.
WPA2
WPA2-based authentication using a RADIUS server.
WPA2-PSK WPA2-based authentication using a PSK.
WPA/WPA2 mixed
A mixed type of authentication. When this value is selected, devices
using the WPA authentication type and devices using the WPA2
authentication type can connect to the wireless network.
Page 106 of 174
To Next Page
Loading...
