DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Configuring via Web-based Interface
Parameter Description
Inform settings
Enable
Move the switch to the right so the router may send reports (data on
the device and network statistics) to the ACS.
Interval
Specify the time period (in seconds) between sending reports.
Auto Configuration Server Settings
URL address
The URL address of the ACS provided by the ISP.
Username The username to connect to the ACS.
Password
The password to connect to the ACS. Click the Show icon ( ) to
display the entered password.
Connection Request Settings
Username
The username used by the ACS to transfer a connection request to
the router.
Password
The password used by the ACS. Click the Show icon ( ) to
display the entered password.
Request port
The port used by the ACS. By default, the port 8999 is specified.
Request path The path used by the ACS.
When you have configured the parameters, click the APPLY button.
Page 134 of 174
To Next Page
Loading...
Need help?
Data Transfer Rates
