DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Configuring via Web-based Interface
Parameter Description
Keep Alive
Move the switch to the right if you want the router to keep you
connected to your ISP even when the connection has been inactive
for a specified period of time. If the switch is moved to the right, the
LCP interval and LCP fails fields are available. Specify the
required values.
Dial on demand
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Static IP Address
For the PPPoE Dual Stack type only.
Fill in the field if you want to use a static IP address to access the
Internet.
PPP IP extension
This option is used by some ISPs. Contact your ISP to clarify if this
option needs to be enabled. If it is required, move the switch to the
right.
PPP debug
Move the switch to the right if you want to log all data on PPP
connection debugging.
Page 88 of 174
To Next Page
Loading...
Need help?
Data Transfer Rates
