D-Link DSL-2877AL - Device Information Display

D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 94
In this section we can configure the Remote System Log Server for this router.
Log Enable: Specify the Remote log state here. Options to choose from are
Disable and Enable.
Remote Log Server IP: Enter IPv4 or IPv6 IP address for the remote System log
server.
Click the Apply button to accept the changes made.
After clicking the View Log button, the following page is available. Please refer to
System Log of Status section.