Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 118
In this section, the following parameters can be configured:
Name: Enter the name of the Inbound filter rule here.
Action: Select the action that will be taken by this rule here. Options to choose from
are Allow and Deny.
Enable: Tick this option to enable this entry.
Remote IP Start: Enter the starting remote IP address here.
Remote IP End: Enter the ending remote IP address here.
Click the Add button to add or modify the rule.
Click the Cancel button to discard the changes made.
In this section, a list of configured inbound filter rules will be displayed.
Click the
icon to modify the specific entry.
Click the
icon to delete the specific entry.
To Next Page
Loading...
