Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Basic Installation Page 15
First Time Installation
The D-Link Setup Wizard will be initiated when a user logs into the router’s Web User Interface (Web UI) for the first time. It is designed to assist users with an easy step-by-
step installation procedure, configuring the basic features found on this router.
Welcome to the D-Link Setup Wizard
On this page, we can read through the steps that will be used for this wizard.
Click the Next button to continue to the next step.
Click the Cancel button to discard the changes made and return to the main menu.
Step 1: Configure Your Internet Connection
Connect the one end of the Internet telephone cable (RJ-11) into the Internet port of
the router and make sure the other end is connected to the DSL connection point.
Click the Connect button to initiate the Internet connection test.
Click the Prev button to return to the previous step.
Click the Cancel button to discard the changes made and return to the main menu.
To Next Page
Loading...
