Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 153
System
To access the System page, click on the Maintenance menu link, at the top, and then click on the System menu link, on the left.
On this page we can configure the system settings of this router.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.
In this section, the following parameters can be configured:
Save Settings To Local Hard Drive: Click the Save Configuration button to
download the router’s settings to the management computers.
Load Settings From Local Hard Drive: Click the Browse button to navigate to the
saved configuration file, on the management computer, and click the Restore
Configuration From File button to restore the router’s configuration to the
settings configured on the configuration file.
Restore To Factory Default Settings: Click the Restore Factory Defaults button
to remove all the settings configured on this router and return the settings to
the factory defaults.
Reboot The Device: Click the Reboot the Device button to reboot the router. All
unsaved configurations will be discarded.
To Next Page
Loading...
Need help?
General
