Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 152
In this section, the following parameters can be configured:
From Email Address: Enter the sender’s email address here.
To Email Address: Enter the recipient’s email address here.
Email Subject: Enter the email’s subject information here.
SMTP Server Address: Enter the SMTP server’s IP address here.
SMTP Server Port: Displays the SMTP server’s port number that will be used.
Enable Authentication: Tick this option to enable SMTP authentication.
Account Name: Enter the email account username here.
Password: Enter the email account password here.
Verify Password: Enter the email account password here again.
Click the Send Mail Now button to send out a test email to test the email settings
configured.
In this section, the following parameters can be configured:
On Log Full: Tick this option to send out an email when the log space is close to
depletion.
On Schedule: Tick this option to send out an email based on the schedule
selected.
Schedule: Select the schedule that will be used to send periodic informational
emails.
Details: Displays the schedule detail information.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.