Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 143
IPv6 Routing
To access the IPv6 Routing page, click on the Advanced menu link, at the top, and then click on the IPv6 Routing menu link, on the left.
On this page we can configure the IPv6 routing rules used by the router.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.
In this section, the following parameters can be configured:
Checkbox: Tick this option to enable the specified route.
Name: Enter the name of the route here.
Metric: Enter the metric value for this route here.
Interface: Select the interface, associated with this route, here.
Destination IPv6 / Prefix Length: Enter the destination IPv6 address and prefix
length value for the route here.
Gateway: Enter the gateway IPv6 address for the route here.
To Next Page
Loading...
Need help?
General
