Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 159
In this section, we can initiate and view diagnostic test information for the WAN
connectivity of this router.
In this section, we can initiate a ping test to IPv4 and IPv6 addresses. The following
parameters can be configured:
Host Name or IP Address: Enter the IPv4 address or host name of the target here
and click the Ping button to initiate the Ping test.
Host Name or IPv6 Address: Enter the IPv6 address or host name of the target
here and click the Ping button to initiate the Ping test.
To Next Page
Loading...
