Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 27
Step 3: Configure Your Internet Connection
After configuring the time zone, we can select an Internet connection type from the
list provided. In this section, we can configure the following:
Country: Select your country from the drop-down menu. After selecting your
country from the drop-down menu, the VPI and VCI parameters will
automatically be selected for your country.
VPI: Enter the Virtual Path Identifier (VPI) value here.
VCI: Enter the Virtual Circuit Identifier (VCI) value here.
DHCP Connection (Dynamic IP Address): Select this option when your Internet
connection can be made automatically. When selecting this option, this wizard
will automatically continue to step 2.
Username / Password Connection (PPPoE): Select this option when your Internet
connection requires a username and a password. For DSL connections, use
this option.
Username / Password Connection (PPPoA): Select this option when your
Internet connection requires a PPPoA username and password.
Static IP Address Connection: Select this option when your Internet connection
requires an IP address, Default Gateway IP address, and DNS IP addresses.
Bridge Connection: Select this option to use this device as a bridging device
between your LAN and the ISP. When selecting this option, this wizard will
automatically continue to step 2.
Click the Next button to continue to the next step.
Click the Prev button to return to the previous step.
Click the Cancel button to discard the changes made and return to the main menu.
To Next Page
Loading...
Need help?
General
