Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 38
Internet Connection Type – PPPoA (Username/Password)
In this section we can configure the Internet connection type. Parameters available
for configuration are the following:
My Internet Connection is: Select the Internet connection type here. Options to
choose from are Static IP, Dynamic IP (DHCP), PPPoE
(Username/Password), PPPoA (Username/Password), and Bridge. This
section will explain the parameters that are available after selecting the PPPoA
(Username/Password) option.
Username: Enter the PPPoA username here.
Password: Enter the PPPoA password here.
Verify Password: Re-enter the PPPoA password here.
Service Name: Enter the service name here. This field is optional.
Reconnect mode: Select the re-connect mode here. Options to choose from are
Always On, On Demand, and Manual. When selecting to use the Always On
option, a schedule can be applied to the re-connect mode. To add a new
schedule, click the New Schedule button.
Maximum Idle Time: After selecting On Demand as the Reconnect Mode, enter
the maximum idle time value here. Entering the value 0 means infinite.
DNS Mode: Select the method that will be used to obtain DNS IP addresses here.
Options to choose from are Receive DNS from ISP and Enter DNS Manually.
Primary DNS Address: After selecting the Enter DNS Manually option for the
DNS Mode, enter the primary DNS IP address here.
Secondary DNS Address: After selecting the Enter DNS Manually option for the
DNS Mode, enter the secondary DNS IP address here. This field is optional.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.
To Next Page
Loading...
Need help?
General
