Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 45
Step 2: Connect Your Wireless Device
After selecting the Auto option, in Step 1, the following page will be available. In this
section, we can configure the following:
PIN: Select this option to use the Personal Identification Number (PIN) method to
connect the two devices. Enter the PIN number here. Enter the same PIN
number at the wireless client software.
PBC: Select this option to use the Push Button Configuration (PBC) method to
connect the two devices.
Click the Connect button to initiate the WPS connection.
Click the Prev button to return to the previous step.
Click the Cancel button to discard the changes made and return to the main menu.
After selecting the PIN option, in Step 2, the following page will be available.
The router will allow 120 seconds for the WPS connection to initiate.
After selecting the PBC option, in Step 2, the following page will be available. Press
the WPS button on the wireless client to initiate the connection.
The router will allow 120 seconds for the WPS connection to initiate.
To Next Page
Loading...
Need help?
General
