Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 50
Wireless Security Mode – WPA-Personal
Wi-Fi Protected Access (WPA) is a more advanced wireless security method that
we can use to prevent unautherized wireless access to this router. Wi-Fi Protected
Access (WPA2) is the most advanced wireless security method that we can use to
prevent unautherized wireless access to this router.
WPA Personal does not require an authentication server.
After selecting to use WPA-Personal as your wireless security mode, the following
parameters will be available to configure:
WPA Mode: Here we can select which WPA mode to use. Options to choose from
are Auto (WPA or WPA2), WPA2 Only, and WPA Only.
Cipher Type: Select the wireless cipher type here. Options to choose from are
TKIP and AES, TKIP, and AES.
Group Key Update Interval: Enter the group key update interval value here.
Pre-Shared Key: Enter the WPA-Personal wireless Pre-Shared Key here. This key
must be configured on all the wireless clients for them to be able to connect to
your wireless network.
To Next Page
Loading...
Need help?
General
