EasyManua.ls Logo

D-Link DSL-2890AL - Page 90

D-Link DSL-2890AL
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 90
In this section, the following parameters can be configured:
Enable Hub and Spoke Mode: Tick this option to enable the hub and spoke mode.
6rd Configuration: Select the 6rd configuration option here. Options to choose
from are 6rd DHCPv4 option and Manual Configuration.
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value here.
Mask Length: Enter the IPv4 mask length here.
6rd Border Relay IPv4 Address: Enter the 6rd border relay IPv4 address here.
Primary DNS Server: Enter the primary IPv6 DNS server address here.
Secondary DNS Server: Enter the secondary IPv6 DNS server address here.
In this section, the LAN IPv6 Address and LAN IPv6 Link-Local Address will be
displayed.

Other manuals for D-Link DSL-2890AL

Related product manuals