29D-Link DSL-3782 User Manual
Section 4 - Conguration
VDSL
VDSL is one of the latest and fastest home broadband technologies. VDSL uses
the DSL port on your DSL-3782 to connect to the Internet. In order for your
DSL-3782 to use VDSL, you must congure the ATM VC Settings and your WAN
Settings.
Congure your
WAN connection:
Select VDSL to congure ADSL connection settings.
If you click on Advanced Settings, the following WAN Settings are available:
PTM VC Settings
Service Number: Select the service number from the drop-down menu. 1-8 are
available. The default is 1.
Enable Virtual
Circuit:
Select whether to enable or disable this Virtual Circuit.
Vlan ID: Enter the VLAN ID. Enter a value from 10 - 4096. The default value is
835.
To set your IPv4 connection parameters of WAN Settings, refer to WAN
Settings on page 30.
To Next Page
Loading...
