31D-Link DSL-3782 User Manual
Section 4 - Conguration
Static IP
Select Static IP if your ISP provides you with a specic IP address.
WAN Settings
Connection: Select Static IP Address.
WAN
Connection Type: Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC, or Routed
IP VC-Mux.
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Default Gateway: Enter the default gateway address provided by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage: Select None or Default Route.
NAT Enable: Enable or disable Network Address Translation.
Enable PPPoE
Passthrough:
Enable or disable PPPoE Passthrough.
Click Save when you are done.