D-Link DSL-3782

50D-Link DSL-3782 User Manual
Section 4 - Conguration
ACL
The Access Control List (ACL) page allows you to enable or disable various
services from being used on the LAN or WAN side. To access this page, click
ACL from the Features menu on the bar on the top of the page.
Access Control Setup
ACL: Activate or deactivate ACLs.
ACL Rule Index: Select the ACL rule index number from the drop down menu.
Active: Activate or deactivate the individual ACL rule.
Service IP address: Enter the IP address range to apply the rule to.
Application: Select a pre-dened service.
ACL Rule
IndexInterface:
Select the interface from the drop down menu to apply this access
control list rule to.
Click Set to create or modify a rule or Delete to remove a rule.
Access Control Listing
A list of the currently dened Access Control List rules is displayed here.