DSL-524B User Manual
6 Total 15 Pages
3.3.2 SAVE SETTING
After getting through each page for parameters setting, click “Save” or “Save apply” to store the
value
in ADSL Modem. Briefly, we named “Save”.
Note
：：
When you save the settings, the web page will be refreshed slowly, please wait it finished.
After
you save the settings, it will take effect until next reboot.
Some
settings only take effect after rebooting the router.
3.4 WAN CONFIGURATION
If the configuration is bridge encapsulation, there is no need to configure any more parameters.
Only
need to use the third party dial-up software to connect the Internet.
Totally, this router supports：PPPoA、PPPoE、MER、IPoA、Bridging. For detail configuration
information,
please check the following configuration guide.
3.4.1 CONFIGURATION GUIDE
Click “WAN” on the left page, enter into “WAN” configuration page.
Note:
At most we can have eight connections. If you need to add a new connection, please
delete
or modify an existing connection.
Figure
3.2
To Next Page
Loading...
Need help?
General
